Black ink not printing

[IAstin]

Unable to get black to print on the page. No pc connected to the printer and using Samsung tablet to connect. Can print in colour.

[Riddle_Decipher]

@IAstin Welcome to HP Community!

 I recommend you try the copier as a stand-alone device without a computer and check if that works in color,:

• If it doesn't work, this could be a hardware issue,
• however, if the copier works and yet, the print out from the computer doesn't work in color, you can try the below steps:

• Press "Windows key" + "r" to get the "Run" window.
• Type "services.msc" to get Services - Go to "Print spooler" - Right-click and "Stop" the service.
• Now again open "Run" - Type "spool" and ok - Go to PRINTERS folder - delete everything in that folder.
• Go to services again - Start the print spooler.
• Now check for issue resolution.
• If the issue persists, also try clean installing the printer drivers. Here are the steps:
• First, unplug the USB cable from the printer if present. 
• Go to Control panel - Programs and feature - Select all the HP printer entries and uninstall them.
• Now go to Control panel - Devices and printer - Select all the printer entries and remove the device.
• Press the "windows key" + "r" to get the "Run" window open - Type "printui.exe /s" (There is a space between .exe & /) and press enter.
• Under print server properties, go to drivers - remove any entry there as well.
• Again, go to the Run window, type - "c:/programdata" - Go to the Hewlett Packard folder, remove any printer related folders & files.
• Restart your computer.

Then, use this link to access the HP website, find the drivers compatible with your windows and install it: CLICK HERE

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE

(By the end of this article all the issues should be resolved)

Let me know how that pans out,

If you feel I was helpful, simply click on Accept as Solution to help the community grow,

That said, I will have someone follow-up on this to ensure you've been helped,

Just in case you don't get back to us within 24 - 48hrs, and have a good day, ahead.

[IAstin]

The printer is not connected to a computer and it prints in colour perfectly. The black ink does not print at all. Will I need to connect the printer to a computer to resolve this?

[Riddle_Decipher]

@IAstin If the device is not connected to a computer and yet only color prints not black, you may need to follow the below steps to resolve this issue:

The printhead could be clogged, and you might need to clean the printhead several times to restore print quality. Use an automated tool from the printer control panel to clean the printhead.

   CAUTION: 

Never turn off the printer when ink cartridges are not installed. To avoid issues that require cleaning the printhead or that can damage the ink system, always replace ink cartridges as soon as possible, and always turn off the printer using the Power button.

1. From the printer control panel, open the Setup  menu.

2. Open the Printer Maintenance menu.

3. If necessary, open the Tools menu, and then touch Clean Printhead.

   A test page prints.

   

4. Examine the test page.

   • If the print quality is unacceptable, touch Clean Again to continue the next level of cleaning. If necessary, repeat these steps for the third cleaning cycle.

     NOTE: 

     If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes before you perform all three levels of cleaning again.

   • If the print quality is acceptable, touch Done.

Try to print. If these steps resolved the issue, you do not need to continue troubleshooting.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE & SKIP TO STEP 3 ONWARD

(By the end of this article all the issues should be resolved)

If you wish to thank me for my efforts, you could click on "Accept as solution" on my post as the solution should help others too.