cancel
Showing results for 
Search instead for 
Did you mean: 
Brunama
New member
1 0 0 0
Message 1 of 2
72
Flag Post
HP Recommended

Calibrate

Hp envy photo 6230

I can't calibrate the printer, it always tells me that the calibration failed, in addition the prints have lines, the printer is new, installed today

1 REPLY 1
HP Support Agent
HP Support Agent
18,458 18,366 1,051 1,152
Message 2 of 2
39
Flag Post
HP Recommended

Calibrate

@Brunama

 

Welcome to HP support community.

 

Perform a power reset

  1. Turn on the printer, if it is not already on.
  2. Wait until the printer is idle and silent before you continue.
  3. With the printer turned on, disconnect the power cord from the rear of the printer.
  4. Wait at least 30 seconds.
  5. Plug back the power cable straight to a wall outlet and printer without any surge protector.
  6. Turn on the printer.

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation