cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New member
1 0 0 0
Message 1 of 2
65
Flag Post
HP Recommended

Cannot print after replacing printhead 3 times

HP Photosmart 7520 e all in one printer
Microsoft Windows 10 (64-bit)

I keep getting missing printhead or failed printhead.  I cleaned my original printhead.  I have replaced with 2 new printheads and nothing works.  I even removed all the HP software and drivers/firmware and reinstalled.  Still get the same problem.  My printer is less than 6 years old and I would hate to have to replace it since it is still in great shape.  I also notice that it is depleting my ink cartridges according to the ink levels.  If nothing has been printed, then where is the ink level going?  This is getting expensive.

Thank you for any help.

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
7,139 7,124 378 284
Message 2 of 2
30
Flag Post
HP Recommended

Cannot print after replacing printhead 3 times

@leopardlady0127

 

Welcome to the HP Support Community.

 

I recommend you to contact the HP Support Team regarding this as this could be a hardware issue.

 

Link: www.hp.com/contacthp/

 

Note:  Select the country accordingly to get the contact details for support.

 

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

 

Thanks!

Have a great day!


I am an HP Employee

0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation