cancel
Showing results for 
Search instead for 
Did you mean: 
Andrea47
New member
1 0 0 0
Message 1 of 2
63
Flag Post
HP Recommended

Collegamento stampante attraverso wi-fi di casa

HP ENVY 5530
Microsoft Windows 10 (64-bit)

Il problema è che per stampare devo necessariamente collegarmi al WI-FI della stampante, che è molto fastidioso, perchè per farlo devo scollegarmi dal WI-FI di casa. Inizialmente invece la stampante appariva tra le alternative di stampa semplicemente essendo collegato al WI-FI di casa, e non riesco più  tornare a questa configurazione. 

1 REPLY 1
Level 15
Level 15
1,124 1,115 106 248
Message 2 of 2
47
Flag Post
HP Recommended

Collegamento stampante attraverso wi-fi di casa

@Andrea47 

Hola,

Con el fin de resolver este problema, configure un nuevo Puerto como sigue:

  1. En el teclado, toque el logotipo de Windows y R. La ventana Ejecutar se abre.
  2. Escriba control printers, luego pulse Intro. La ventana Dispositivos e impresoras se abre.
  3. Haga clic con el botón derecho del ratón en el icono de su impresora, luego en Propiedades de impresora, en la pestaña Puertos y en Agregar puerto....
  4. Seleccione Standard TCP/IP Port y pulse Puerto nuevo....
  5. Haga clic en Siguiente, luego introduzca la dirección IP de la impresora (por ejemplo: 192.168.1.97) en el campo Nombre o dirección IP de impresora y haga clic en Siguiente.
  6. Una vez añadido el puerto, haga clic en Finalizar y cierre todas las ventanas.
  7. Intente imprimir.

Quedo su disposición en caso de necesidad.

Cordialmente,:Wink:

 

_________________________

Hello,

In order to solve this problem, configure a new port as follows:

  1. On the keyboard, press the Windows logo key and the R key simultaneously. The Run window opens.
  2. Type control printers, then press Enter. The Devices and Printers window opens.
  3. Right-click on your printer icon, then click on Printer properties, click on the Ports tab, and click on Add Port....
  4. Select Standard TCP/IP Port and click New Port....
  5. Click Next, then enter the printer's IP address (e.g. 192.168.1.97) in the Printer Name or IP Address field and click Next.
  6. Once the port is added, click Finish and close all windows.
  7. Try to print.

I remain at your disposal in case of need.

Best regards,:Wink:





I'm not an HP employee. Did this message answer your question? Include it below as an Accepted Solution! Did you find this message useful?  Click on the thumbs up set to give a Compliment! Follow us on Facebook Assistance customers HP.

HP Expert support community HP France.
Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation