cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
1 0 0 0
Message 1 of 2
47
Flag Post
HP Recommended

Envy 4502 Windows 10 problem

Microsoft Windows 10 (64-bit)

I have an Envy 4502 that I have used for the past few years on my wireless network.  A few days ago I experienced a hard drive failure in my laptop and had to get a new one.  It is running Windows 10 just like the last one but i'm sure it is an updated version.  I never had a problem connecting, printing or scanning before.  For some reason I cannot get this computer to work with the printer.  I can see in the control panel it states there is no driver.  I have installed the full software, used the Scan Print doctor, the simple add printer in the control panel, none of it works.  The printer still works with other computers and phones.  Is there a simple updated driver that I can get to put in the drivers folder to fix this problem??  Help is appreciated!

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
10,592 10,572 794 788
Message 2 of 2
19
Flag Post
HP Recommended

Envy 4502 Windows 10 problem

@KS_Musicman, Welcome to HP Support Community!

 

Follow the steps below-

 

Use HP Print and Scan Doctor

Download HP Print and Scan Doctor and run the program. It will automatically diagnose and fix any printer connectivity issues. 

For more information, go to https://support.hp.com/us-en/topic/printscandoctor

 

Update the printer firmware

Download available firmware updates from the HP website

With the printer on and connected to the computer, go to HP Customer Support - Software and Driver Downloads, and then identify your printer. Look for and install any available firmware updates. Refer to the document HP Printers - Updating or Upgrading Printer Firmware

 

Assign manual IP to the printer

The steps on how to set a manual IP address can be found here.

For the DNS servers please use 8.8.8.8 for the Manual Preferred DNS Server and 8.8.4.4 for the Alternate DNS server. These are Google’s public DNS servers

 

I recommend you delete the driver and root level and retry, follow the steps below: 

  

1) In Windows, search for and open Programs and features 

2) Select your HP Printer 

3) Select Uninstall 

4) In Windows, search for and open Devices and printers 

5) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’ 

6) Open up the run command with the “Windows key + R” key combo. 

7) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe”

8). Click on the “Drivers” tab 

9) Look for the HP Printer driver. If you see it Click on it and click Remove at the bottom 

10) Select Ok 

11) Select Apply and Ok on the Print Server Properties windows 

12) Close Devices and Printers.

 

Use this link to download and install the new driver. Configure the printer.

 

Add a TCP/IP port.

  1. Print a Network Configuration Report from the Printer Settings or Wireless menu.
  2. Right-click your printer, select Printer Properties, click the Ports tab, and then click Add Port.
  3. Select Standard TCP/IP Port, and then click New Port.
  4. Follow the instructions to add a new port using the information listed on the Network Configuration Report.
  5. Try printing.

If the issue persists, try the Windows built-in drivers. Follow the steps below:

 

•    Go to Control Panel - Devices and Printers - Click on "Add printer" and follow the on-screen instructions.

•    When the page prompts for the drivers, select "Windows update". The driver list will be updated.

•    Click HP, Hewlett Packard, or Hewlett-Packard in the Manufacturer pane, and then click the name of your printer in the Printers pane.

 

Refer to this document HP Printers - Installing and Using the Windows Built-in Print Driver for help.

 

Keep me posted.

 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping! 

TEJ1602
I am an HP Employee

Reply
0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation