Envy 4516 wont print word document

[Joycee1]

My printer is in Idle default won't allow me to print!! I press a button in goes into resume still NOTHING!!

I've literally spent time hours on this, reinstalling absolutely everything, is this printer not compatible to MAC!!!!

I'M so DONE !!!

[KrazyToad]

@Joycee1

I suggest you perform a Printer Reset, restart your Router and Mac

- With the printer turned on, disconnect the power cord from the rear of the printer and from the wall outlet or power strip.
- Wait at least 60 seconds.
- Plug the power cord back into the wall outlet.
NOTE: HP recommends connecting the printer power cord directly to a wall outlet.
- Reconnect the power cord to the rear of the printer.
- Turn on the printer, if it does not automatically turn on.
- The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
- Wait until the warm-up period finishes and your printer is idle and silent before you proceed.
 

Also check for Firmware update. You can refer to this Link: https://support.hp.com/in-en/document/c02919168

If the issue persists please check the following details

 Ensure the printer and the MAC are connected to the same wireless network.
-Note:- This printer supports only 2.4GHz network. Do not connect it to 5 GHz Network incase your Router supports both 2.4 and 5 GHz
- If you have a Dual-band router and both 2.4GHz and 5GHz networks share the same name/SSID, then the printer will not be able to connect to the network. In this case, contact your Internet service provider to assign different names to both the networks.

Please check with your Internet service provider if your router is able to forward 'Bonjour packets'.

Bonjour locates devices such as printers, other computers, and the services that those devices offer on a local network using multicast Domain Name System (mDNS) service records. The software comes built-in with Apple's macOS and iOS operating systems.

Also perform a ping test using the Mac Network Utility and let me know the results. Use the printer IP address to perform a ping test, the printer IP can be located by touching the wireless icon on the printer display or by printing a Network Configuration Page

Keep me posted 😋

If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.