• ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Experiencing 'Printer Blocked' or 'Printer Error' message? Click here for more information.
Check some of the most frequent questions about Instant Ink: HP INSTANT INK, HP+ PLANS: INK AND TONER.


Check out our Black or Color Ink Not Printing, Other Print Quality Issues info about: Print quality and Cartridge Issues.
HP Recommended
HP OfficeJet 4630
Microsoft Windows 10 (64-bit)

Error Code OXC4EB8274 Printer Cartridge Jammed. I've tried unplugging and restarting several times, the cartridge is stuck on the right side. It does not move freely. I've had this printer for 4 years, prior to this error I was having problems with the alignment page printing. Any ideas how to fix this?

 

 

1 REPLY 1
HP Recommended

 

@LadyL21

Welcome to HP Forums,

Let's get straight to it!

 

In some cases, removing the ink cartridges and resetting the printer can clear the error message.

  1. Turn on the printer.

  2. Wait until the printer is idle and silent before you continue.

  3. Disconnect the USB cable from the rear of the printer. If your printer has a network or wireless connection, leave it connected.

  4. Remove the ink cartridges from the printer.

  5. With the printer turned on, disconnect the power cord from the rear of the printer and from the wall outlet or power strip.

  6. Wait at least 60 seconds.

  7. Plug the power cord back into the wall outlet.

    NOTE: 

    HP recommends connecting the printer power cord directly to a wall outlet.

  8. Reconnect the power cord to the rear of the printer.

  9. Turn on the printer, if it does not automatically turn on.

    The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

  10. Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

  11. Reinsert the ink cartridges, and then close the ink cartridge access door.

  12. If you receive a prompt to print a calibration page, do so.

  13. If you disconnected the USB cable, reconnect it to the rear of the printer.

  14. Try to print.

If the issue persists, please upgrade the printer firmware: click here for instructions.

 

Keep me posted, as I (Or a trusted colleague) shall follow-up on this case to ensure the concern has been addressed, 

And your device is up and running again, only in case you don't get back to us, first! 

That said, If the information I've provided was helpful, give us some reinforcement by clicking the solution and kudos buttons, 

That'll help us, and others see that we've got the answers!

Good Luck.

Riddle_Decipher
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.