Error code oxc19a0015

[Becky81]

I have tried troubleshooting my printer by factory resetting, I tried unplugging it from the back of the printer & replugging it into the wall, I've tried cleaning the cartridges but still get the same error code of OXC19a0015 is there anything else I can try?

[Mans]

@Becky81 

Hello,

What is the exact model of your printer (example: CB747A)?
To locate this Product Number P/N: this document.

In some cases, remove the ink cartridges and reset the printer can solve the error.

1. Turn on the printer.
2. Before continuing, wait until the printer is idle and silent.
3. Disconnect the USB cable from the back of the printer. If your printer has a network or wireless connection, leave it connected.
4. Remove the ink cartridges of the printer.
5. With the printer turned on, unplug the power cord from the back of the printer and from the wall outlet.
6. Wait at least 60 seconds.
7. Plug the power cord into the outlet.

   NOTE:  HP then recommends reconnecting the printer's power cord directly into a wall outlet.

8. Reconnect the power cord to the back of the printer.
9. Turn on the printer, if it does not automatically make it.
   It is possible that the printer goes through a warm-up cycle. It is also possible that the printer lights blink and the carriage moves.
10. Wait until the preheat cycle and until the printer is idle and silent before continuing.
11. Reinsert the ink cartridge, and then close the access door to the cartridges.
12. Print a calibration page, if prompted.
13. If you disconnected the USB cable, reconnect it to the back of the product.
14. Try to print.

Don't hesitate to ask us if you need us.

Best regards,🤠

[Becky81]

Thanks but I tried all of that & the product # is T0F28A

[Mans]

@Becky81 

Thanks for your return,

Since you have the message 0xc19a0015, this confirms that the problem is hardware at the printer.

Is your printer still under warranty?
Check warranty status

In case of need, do not hesitate to solicit us.

Best regards,🤠