• ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Experiencing 'Printer Blocked' or 'Printer Error' message? Click here for more information.
Check some of the most frequent questions about Instant Ink: HP INSTANT INK, HP+ PLANS: INK AND TONER.


Check out our Black or Color Ink Not Printing, Other Print Quality Issues info about: Print quality and Cartridge Issues.
HP Recommended
Officejet 6600

Officejet 6600 won't print and gives me following error message:  There is a problem with the printer or ink system.  0x61011

I have done all the things mentioned in HP Scan Doctor, etc.  Changes ink cartridges, unplugged, removed device and reloaded with drivers, but still get this message and no printing.  The carriage is moving, no paper jam.  Any ideas or do I toss it in the trash and buy a new one!!!

3 REPLIES 3
HP Recommended

@VH01, Welcome to the HP Support Community!

 

Let us try these steps to resolve this issue:

 

Reset the printer

  1. With the printer turned on, disconnect the power cord from the rear of the printer.
  2. Wait at least 60 seconds.
  3. Reconnect the power cord to the rear of the printer.
  4. Turn ON the printer, if it does not automatically turn on.
  5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

 

Update the printer firmware

Click here to know different methods of updating printer firmware.

 

Make sure that the carriage moves freely and there is no jams inside the printer.

Perform solution four mentioned in this document.

 

Now, try printing a status report

  1. On the control panel, touch the Right Arrow ().

  2. Touch Setup ().

  3. Touch the Down Arrow () to scroll to Reports.

  4. Touch Reports, and then touch Printer Status Report. The Printer Status Report prints.

Refer to this document for more info on troubleshooting the 0x errors

 

Let me know how this goes.

 

If you feel my post solved your issue, please click “Accept as Solution”, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

KUMAR0307
I am an HP Employee

HP Recommended

Thanks but did all of this and it still gives me same message.  Maybe print head is just dead!

HP Recommended

@VH01

 

That's unfortunate. If the issue persists, please contact our HP Support team for Service Options as it could be a possible hardware issue:

1) Click on this link - www.hp.com/contacthp/

2) Select your product type below.

3) Enter the serial of your device.

4) Select the country from the drop-down.

5) Select the appropriate option based on your preference.

6) Fill the web-form and proceed further.

 

Keep me posted for any other assistance.

 

If you feel my post solved your issue, please click “Accept as Solution”, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

KUMAR0307
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.