cancel
Showing results for 
Search instead for 
Did you mean: 
Amandak8t8
New member
1 0 0 0
Message 1 of 2
56
Flag Post
HP Recommended

Function address 0x6256a388 caused a protection fault. (exception code Oxe06d7363) ‎07-11-2018 03

hp officejet 3835
Microsoft Windows 10 (64-bit)

Function address 0x6256a388 caused a protection fault. (exception code Oxe06d7363)

I am unable to access the printer properties from HP Assistant or any other application. I get this error message:

Function address 0x6256a388 caused a protection fault. (exception code Oxe06d7363)

 

I can print in B&W not colour

1 REPLY 1
HP Support Agent
HP Support Agent
6,316 6,303 457 500
Message 2 of 2
29
Flag Post
HP Recommended

Function address 0x6256a388 caused a protection fault. (exception code Oxe06d7363) ‎07-11-2018 03

@Amandak8t8, Welcome to HP Support Community!

 

Try the steps below in sequence-

 

Reset the printer

  1. Turn the printer on, if it is not already on.
  2. Wait until the printer is idle and silent before you continue.
  3. With the printer turned on, disconnect the power cord from the rear of the printer.
  4. Unplug the power cord from the wall outlet.
  5. Wait at least 60 seconds.
  6. Plug the power cord back into the wall outlet.
  7. Reconnect the power cord to the rear of the printer.
  8. Turn on the printer, if it does not automatically turn on.
  9. Wait until the printer is idle and silent before you proceed

Update the printer firmware

Download available firmware updates from the HP website

With the printer on and connected to the computer, go to HP Customer Support - Software and Driver Downloads, and then identify your printer. Look for and install any available firmware updates. For more information, go to Updating or Upgrading Printer Firmware.

 

Use HP Print and Scan Doctor

Download HP Print and Scan Doctor and run the program. It will automatically diagnose and fix any printing and scanning issues. 

For more information, go to https://support.hp.com/us-en/topic/printscandoctor.

 

If the issue persists, I recommend you delete the driver and root level and retry, follow the steps below: 

  

1) In Windows, search for and open Programs and features 

2) Select your HP Printer 

3) Select Uninstall 

4) In Windows, search for and open Devices and printers 

5) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’ 

6) Open up the run command with the “Windows key + R” key combo. 

7) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe”

😎 Click on the “Drivers” tab 

9) Look for the HP Printer driver. If you see it Click on it and click Remove at the bottom 

10) Select Ok 

11) Select Apply and Ok on the Print Server Properties windows 

12) Close Devices and Printers.

 

Now, download and install the full-featured software from here.

 

Once the printer is configured, try printing.

 

Keep me posted. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

TEJ1602
I am an HP Employee

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation