12-18-2019 11:51 AM
HP 2130 is bleeding red on the side of my black fonts while in wallet sized printing. frustrated after putting in new black ink. Red is showing and I cannot have this.
12-20-2019 03:56 PM
I have gone through your Post and would like to help
Please clean the Printhead and check if that helps
Load U.S. letter or A4 size, unused, plain paper into the input tray.
Turn on the printer.
Open or search for the HP folder in your list of installed software programs, click the folder for your printer, and then click the name of your printer.
HP Printer Assistant opens.
On the HP Printer Assistant window, click Maintain Your Printer.
Click the Device Services tab, and then click Clean Ink Cartridges.
Once the cleaning cycle completes, click Print.
A test page prints.
Examine the test page.
If the print quality is acceptable, click Done. You can stop troubleshooting.
If the print quality is unacceptable, click Second-level Clean when prompted to perform the next level of cleaning.
NOTE: If the ink cartridges are badly clogged, it might require another cleaning cycle. If so, wait 30 minutes before you perform both levels of cleaning again.
Also ensure the Firmware is up to date. Link: https://support.hp.com/in-en/document/c02919168
Keep me posted how it goes
If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.
I Am An HP Employee