Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here
Resolve Windows 10 or update issues on HP computer or printer– Click Here
I get error message when I turn on printer. Ink system. Checked ink all ok, unplug and wait 60 seconds plug back in same message. Won’t go away.
I'd like to help with the printer error.
Try the below suggestions
Let's try a power reset on the printer
Reset the product
Remove and reinsert each ink cartridge.
Open the door to access to the ink cartridges.
Wait until the carriage stops moving before you continue.
Push the ink cartridge to remove it, and then push it into its slot until it snaps into place.
Repeat these steps for the other three ink cartridges.
Close the ink cartridge access door.
If the error message persists, continue to the next step.
Check the carriage for a printhead latch
Open the door to access to the ink cartridges, and then determine if the carriage inside the printer has a printhead latch.
Example of a carriage with a latch on the printhead
If your carriage has a printhead latch, continue to the next step.
Refer to -Resolving 'Ink System Failure', 'System Supply Problem' Errors
Hope this helps! Keep me posted.
And, Welcome to the HP Support Community.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping
Didn't find what you were looking for?
Ask the community