01-29-2020 04:02 AM
I can't get my HP DeskJet 3632 to connect to Wifi. Tried talking to the live virtual assistant but no solution. Ready to put this piece of junk in the bin.
01-31-2020 12:54 PM
Welcome to the HP Support Community. I'd be happy to assist you to connect the printer to the wireless network. Let us try these steps:
Use WPS to connect the printer to your wireless network.
Locate the WPS button on your router, but do not press it yet.
If your router does not support WPS, skip to the next step to connect the printer with the HP Smart app.
Turn on the printer. If the printer is in sleep mode, press the Cancel button on the control panel.
On the printer control panel, press and hold the Wireless button for at least 3 seconds or until the wireless light starts to flash.
On the router, press and hold the WPS button for 3 to 5 seconds or until it shows that the WPS connection process has started.
The printer stops searching for a WPS connection two minutes after the wireless button is pressed. If you were unable to press the WPS button within that timeframe, attempt these steps again.
Once the printer connects to the wireless network, the blue Wireless light on the control panel turns on solid.
- This printer supports only 2.4GHz network. So, the MAC should be on the 2.4GHz network.
- If you have a Dual-band router and both 2.4GHz and 5GHz networks share the same name/SSID, the printer will not be able to connect to the network. In this case, contact your Internet service provider to assign different names to both the networks.
Install the printer using AirPrint driver and try printing.
Hope this helps! Keep me posted.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Have a great day!
I am an HP Employee