cancel
Showing results for 
Search instead for 
Did you mean: 
MaruTheFox
New member
2 1 0 0
Message 1 of 3
111
Flag Post
HP Recommended

HP ENVY error code 0XC0260000 TRTHREADSTOP C

Microsoft Windows 10 (64-bit)

My printer is locked and only displays "ERROR CODE 0XC0260000 TRTHREADSTOP C". 
update: got it working again. 

2 REPLIES 2
Level 15
Level 15
1,037 1,030 99 238
Message 2 of 3
84
Flag Post
HP Recommended

HP ENVY error code 0XC0260000 TRTHREADSTOP C

@MaruTheFox 

Hello,

In some cases, remove the ink cartridges and reset the printer can solve the error.

  1. Turn on the printer.
  2. Before continuing, wait until the printer is idle and silent.
  3. Disconnect the USB cable from the back of the printer. If your printer has a network or wireless connection, leave it connected.
  4. Remove the ink cartridges of the printer.
  5. With the printer turned on, unplug the power cord from the back of the printer and from the wall outlet.
  6. Wait at least 60 seconds.
  7. Plug the power cord into the outlet.
    NOTE:  HP then recommends reconnecting the printer's power cord directly into a wall outlet.
  8. Reconnect the power cord to the back of the printer.
  9. Turn on the printer, if it does not automatically make it.
    It is possible that the printer goes through a warm-up cycle. It is also possible that the printer lights blink and the carriage moves.
  10. Wait until the preheat cycle and until the printer is idle and silent before continuing.
  11. Reinsert the ink cartridge, and then close the access door to the cartridges.
  12. Print a calibration page, if prompted.
  13. If you disconnected the USB cable, reconnect it to the back of the product.
  14. Try to print.

In case of need, do not hesitate to solicit us.

Best regards,:Wink:





I'm not an HP employee. Did this message answer your question? Include it below as an Accepted Solution! Did you find this message useful?  Click on the thumbs up set to give a Compliment! Follow us on Facebook Assistance customers HP.

HP Expert support community HP France.
Reply
0 Kudos
MaruTheFox
New member
2 1 0 0
Message 3 of 3
78
Flag Post
HP Recommended

HP ENVY error code 0XC0260000 TRTHREADSTOP C

Yes I’ve tried all of those step up it didn’t work. Ended up just holding down the power button while the error message was there and it kind of started working again. 

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation