cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
1 0 0 0
Message 1 of 4
80
Flag Post
HP Recommended

HP Envy 4501 only prints blank pages

Microsoft Windows 10 (32-bit)

I've tried everything.... reinstalling the printer and drivers, reconnecting to my home network, taking out the print cartridges.  The ink levels are good... what is ink hardening or drying.  I have to admit I haven't used the printer in about two years and only trying now since I'm working from home during the quarantine.   Please help!

3 REPLIES 3
Highlighted
HP Support Agent
HP Support Agent
8,530 8,515 451 339
Message 2 of 4
58
Flag Post
HP Recommended

HP Envy 4501 only prints blank pages

@traceyannj

 

Welcome to the HP Support Community.

 

Does this happen while copying too?

 

Since you haven't used the Printer in two years, it's likely that the ink cartridges have dried up. Please try inserting a new set of ink cartridges.

 

Let me know if this helps.

 

If the information I've provided was helpful, give us some reinforcement by clicking the "Accept as solution" button, that'll help us and others see that we've got the answers!

 

Thanks!

Have a great day!

 

 


I am an HP Employee

Reply
0 Kudos
Highlighted
New member
1 1 0 0
Message 3 of 4
41
Flag Post
HP Recommended

HP Envy 4501 only prints blank pages

I am also in the same situation. However, My printer says there is still black ink, but I'm getting blank pages after several attempts.

Reply
0 Kudos
Highlighted
HP Support Agent
HP Support Agent
20,743 20,643 1,149 1,240
Message 4 of 4
14
Flag Post
HP Recommended

HP Envy 4501 only prints blank pages

@ccammaro1

 

Welcome to HP support community.

 

Manually clean the area around the ink nozzles

  1. Gather the following materials:

    • Dry foam-rubber swabs, lint-free cloth, or any soft material that does not come apart or leave fibers (coffee filters work well)

    • Distilled, filtered, or bottled water (tap water might contain contaminants that can damage the ink cartridges)

         CAUTION: 

      Do not use platen cleaners or alcohol to clean the area. These can damage the ink cartridge or the printer.

  2. Make sure the printer is on.

  3. Open the scanner lid.

  4. Open the ink cartridge access door.

    The carriage moves to the ink cartridge access area.

    Figure : Open the ink cartridge access door

    Image: Open the ink cartridge access door.
  5. Wait until the carriage is idle and silent before continuing.

  6. To release the ink cartridge, lift the lid on the ink cartridge slot, and then gently push the lid back until it stops.

  7. Pull up on the ink cartridge to remove it from the slot.

    Figure : Remove the ink cartridge

    1.  

      Image: Remove the ink cartridge.

      Lift the lid
    2. Gently push the lid back

    3. Pull up on the ink cartridge

       CAUTION: 

    Do not remove both ink cartridges at the same time. Remove and clean each ink cartridge one at a time. Do not leave an ink cartridge outside the printer for more than 30 minutes.

  8. Hold the ink cartridge by its sides.

    Figure : Hold the ink cartridge by its sides

    Image: Hold the ink cartridge by its sides.
  9. Inspect the ink cartridge contacts for ink and debris buildup.

       CAUTION: 

    Do not touch the copper-colored contacts or the ink nozzles. Touching these parts can result in clogs, ink failure, and bad electrical connections.

    Figure : Do not touch the contacts or nozzles

    Image: Do not touch the contacts or nozzles.
  10. Lightly moisten a clean, foam-rubber swab with distilled water, and then squeeze any excess water from it.

  11. Clean the face and edges around the ink nozzle with the swab.

       CAUTION: 

    Do not clean the ink nozzle plate.

    Figure : Clean the area around the ink nozzle

    1.  

      Image: The ink nozzle and ink cartridge contacts.

      Nozzle plate - Do not clean
    2. Area surrounding ink nozzle - Do clean

    3. Ink cartridge contacts - Do not clean

  12. Either let the ink cartridge sit for 10 minutes to allow the cleaned area to dry, or use a new swab to dry it.

  13. Hold the ink cartridge at a slight upward angle with the ink cartridge contacts facing the rear of the printer, and then slide the ink cartridge into the empty slot.

    Figure : Reinstall the ink cartridge

    Image: Reinstall the ink cartridge.
  14. Close the lid on the ink cartridge slot to secure the ink cartridge into place.

    Figure : Close the ink cartridge lid

    Image: Close the ink cartridge lid.
  15. Repeat these steps to clean the area surrounding the ink nozzle on the other ink cartridge.

  16. Close the ink cartridge access door.

    Figure : Close the ink cartridge access door

    Image: Close the ink cartridge access door.
  17. Close the scanner lid.

  18. Try printing again.

You can refer this HP document for more assistance:- Click here

 

I hope that helps.

If this helps, please mark the public post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

Reply
0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation