cancel
Showing results for 
Search instead for 
Did you mean: 
bvw62
New member
1 0 0 0
Message 1 of 2
44
Flag Post
HP Recommended

HP Photosmart C5180

Microsoft Windows 7 (64-bit)

Err. 0xc18a0001    Ink system failure 

1 REPLY 1
HP Support Agent
HP Support Agent
2,189 2,189 102 176
Message 2 of 2
12
Flag Post
HP Recommended

HP Photosmart C5180

@bvw62 Welcome to HP Community!

 

I understand that you are getting an ink system failure  0xc18a0001  message.

 

Do not worry. I will try to fix the issue.

 

Reset the printer to recover from printer failures.

  1. With the printer turned on, disconnect the power cord from the printer.

  2. Unplug the power cord from the power source.

  3. Wait 60 seconds.

  4. Reconnect the power cord to a wall outlet and to the printer.

    NOTE: 

    HP recommends plugging the printer directly into a wall outlet.

  5. Turn the printer on.

If the error message persists, continue to the next step.

 

Remove the ink cartridges and reset the printer.

  1. Remove the ink cartridges from the printer.

  2. With the printer turned on, disconnect the power cord from the printer.

  3. Unplug the power cord from the power source.

  4. Wait at least 60 seconds.

  5. Reconnect the power cord to a wall outlet and to the printer.

    NOTE: 

    HP recommends plugging the printer directly into a wall outlet.

  6. Turn the printer on.

  7. Reinsert the ink cartridges, and then close the ink cartridge access door.

  8. If you receive a prompt to print a calibration or alignment page, do so.

Keep us posted,

If you would like to thank us for our efforts to help you, 


Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 


Have a great day!

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation