Showing results for 
Search instead for 
Did you mean: 
New member
1 0 0 0
Message 1 of 1
Flag Post
HP Recommended

HP Tango Printers - Windows 10 Wireless Printer Setup

HP Tango
Microsoft Windows 10 (64-bit)
If you are using Windows 10 and unable to setup the Tango printer using WiFi, follow the below steps. 
Use HP Smart to connect the printer to your wireless network.
  1. Turn on the printer.
  2. On your computer, download and install HP Smart from the Microsoft store.
  3. On the back of the printer, press and hold the Wireless button for 5 seconds until the Edge lighting flashes blue.
    You must complete the network setup within two hours.
  4. On your computer, open HP Smart, and then click the + Sign (ADD a printer) 
    OR            Click Set Up a New Printer, and then click Continue.
  5. HP Smart searches for printers on your wireless network.
  6. Select Tango printer, and then click Continue.
  7. When prompted, type the Wi-Fi password.
  8. After the printer connects to your wireless network, click Continue, and then click Exit Setup.
    Once the printer connects to the wireless network, the blue Wireless light on the control panel turns on solid.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation