• ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Experiencing 'Printer Blocked' or 'Printer Error' message? Click here for more information.
Check some of the most frequent questions about Instant Ink: HP INSTANT INK, HP+ PLANS: INK AND TONER.


Check out our Black or Color Ink Not Printing, Other Print Quality Issues info about: Print quality and Cartridge Issues.
HP Recommended
envy 4502
Microsoft Windows 7 (64-bit)

I have an Envy 4502 printer. I installed ORBI RBR50, The printer picks up the network with an IP 10.0.0.7, I get no printing from my desktop running windows 7 64bit. I get  "printer error"  in my printing. The scan doctor says, "no communication with the printer." My ipads and iphones connect fine with Airprint, just my desktop can't print wirelessly.  Thank you.

1 REPLY 1
HP Recommended

@Risklife

Welcome to the HP Community

 

Make sure the printer and the computer are on the same network.

 

I recommend you delete the driver at the root level and Install the drivers, follow the steps below:

 

Remove the USB if connected

 

1.) In Windows, search for and open Programs and features 

2.) Select your HP Printer 

3.) Select Uninstall 

4.) In Windows, search for and open Devices and printers 

5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose `Delete' or `Remove Device' 

6.) Open up the run command with the "Windows key + R" key combo. 

7.) Type printui.exe /s and click Ok. (Note: there is a space in between "printui.exe" and "/s") 

8.) Click on the "Drivers" tab 

9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom 

10.) Select Ok

11.) Select Apply and Ok on the Print Server Properties windows

12.) Close Devices and Printers 

 

Then, Click on this link: https://support.hp.com/in-en/drivers/selfservice/swdetails/hp-envy-4500-e-all-in-one-printer-series/...  to download and install the HP ENVY 4500 e-All-in-One Printer series Full Feature Software and Drivers.

 

Assign Manual IP to the printer:

 

1) Print a Network configuration page from the printer's control panel. 

2) Look for IP address from the Network configuration page. 

3) Open a web browser - Chrome or IE or any other browser that you are using. 

4) Type the IP address mentioned on Network configuration page into the browser's address bar or URL bar and press enter button. 

5) Go to the Network tab. 

6) Click on Networking from the left pane. 

7) Then click on Network Address (IP). 

😎 Click on Manual IP Address and go to suggest a Manual IP. 

9) Scroll down the screen and select Manual DNS server. 

10) Enter the Primary and secondary DNS server from the Network Configuration page into the Manual Preferred DNS server field. 

11) Click on Apply. 

 

Refer to the video link for step by step instructions - https://www.youtube.com/watch?v=SCnYyq80V9g 

 

Note: The video is for win 8 but steps are similar for other operating systems as well. You need to enter the IP address in the browser's URL or the address bar to access the printer page.

 

Create TCP/IP Port: 

 

1. Search Windows for devices, and then select "Devices and Printers" In the list of results.

2. Right-Click the name of your printer, and then select Printer Properties.

3. Click the Ports tab, click on "Add port" select "Standard TCP/IP Port" and click "New Port"

4. Click next on the Add Standard TCP/IP printer port wizard, enter the printer IP address and click next and then click on "OK".

5. Now under the "Ports" tab you will find the Newport with the printer IP address, click "Apply" and "OK".

6. Restart the computer.

 

Try to print.

 

Keep me posted, how it goes!

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Have a great day!

Cheers:)

Raj1788
I am an HP Employee 

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.