01-04-2020 08:50 AM
I have a HP 2600 deskjet with no set up cartridges, how do I bypass to print. Thank you!
01-07-2020 08:26 AM
@jes1959 Welcome to HP Community!
I understand that you would like to bypass the setup ink cartridges.
Do not worry. I will try to fix the issue.
Please Install standard replacement ink cartridges in place of the SETUPs ink cartridges
If the issue still persists, please perform the below steps and check for the issue.
Open the ink cartridge access door.
Press and hold the Wireless button for 3 seconds.
Close the access door. A Load Paper message displays on the control panel, and the printer begins initializing.
If the initialization does not begin, repeat steps a through c until initialization begins.
Follow the prompts on the control panel to complete initialization.
let me know how that pans out,
And the answer to the above question will help me, help you!
Keep me posted, and if any of the above questionnaires helped resolve the issue,
Mark this post as an "Accepted Solution".
01-07-2020 11:29 AM
Thank you for the response but it didn't work, if i rest the printer it will print the page with model and serial number, after that it shows no ink available, if i request to print a test page it then says device busy.
Thank you ,
01-07-2020 02:18 PM
Thank you for the update.
In that case, please contact our phone support. They will help you.
Here is how you can get in touch with phone support.
1)Click on this link - www.hp.com/contacthp/
2)Select the product type.
3)Enter the serial number of your device or select let HP detect your product option.
4)Select the country from the drop-down.
5)You should see the HP phone support number or Chat option listed.
Have a nice day!!