I injected 3 oz.of printerhead cleaning solution in each port. Get printer failure message. Can fix?

[Larry371]

Officejet 6600 has printer failure message after injecting 3 oz. printerhead cleaning solution in each port. Can it be fixed?

[Riddle_Decipher]

@Larry371 Welcome to HP Community!

Solution one: Reset the printer

1. With the printer turned on, disconnect the power cord from the printer.

2. Unplug the power cord from the power source.

3. Wait 60 seconds.

4. Reconnect the power cord to a wall outlet and to the printer.

   NOTE: 

   HP recommends plugging the printer directly into a wall outlet.

5. Turn the printer on.

After completing the above steps, try sending a print job to the printer.

• If the Printer Failure error is resolved, continue to the next step to update the firmware.

• If the Printer Failure error is still present, continue to the next solution.

The solution to these errors depends on if the message you are experiencing includes an error code.

Select from the following message types for steps to resolve the issue.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE

(By the end of this article all the issues should be resolved)

Let me know how that pans out,

If you feel I was helpful, simply click on Accept as Solution to help the community grow,

That said, I will have someone follow-up on this to ensure you've been helped,

Just in case you don't get back to us within 24 - 48hrs, and have a good day, ahead.