01-24-2013 05:46 PM
I have an HP Deskjet 2512. The black ink cartridge was empty so I went to a local cartridge refill/recycle center and purchased a replacement. When I inserted the cartridge into the printer and tried to print a document, an error message came up that said "The following print cartridges are not intended for use in this printer as it is currently configured: Black. Refer to printer documentation."
Can I override this error message? I should note that I am a Mac user.
Thanks for any help you can offer.
Solved! Go to Solution.
01-25-2013 07:27 PM - last edited on 02-22-2017 12:52 PM by OscarFuentes
Most likely this problem is being caused by either a disruption in the cartridges power (i.e. dirty electrical contacts), or the cartridge is just faulty. I was not able to find a full document dedicated to the problem you are having, but I did find a document that does mention this error. The full document will be linked below, but these are the steps I pulled from that document.
One ink level icon and ink drop icon are blinking, and the attention light is on.
Figure 11: Graphic - Status lights of the HP Deskjet 2510 All-in-One series
Blinking ink level icon indicates that corresponding cartridge has a problem. Cartridge may be improperly installed, incompatible, defective, counterfeit or very low on ink.
Give these steps a try, and let me know what happens.
03-27-2013 07:27 AM
Hi Ciara; my name is Brandy and I have the same problem. I bought the HP cartridges for my HP Photosmart d110, and in less of a month the printer presented this message "The following cartridges are not intended for use in this printer as it is currently configured". I took both cartridges of my printer and reinserted again, but it still the same message.
What can I do?
Branty from DR
03-31-2013 09:14 AM
Hi i have a HP4250 all in one printer and i get an error message saying "incompatible ink cartridge" the printer will not print at all.
I am using a HP ink cartridge HP75XL.
Any help would be welcome
04-10-2013 12:21 PM
I did what was sugested, took the black cartridge out, shut door and pressed OK. Printer indicated color was only available. Then I reloaded the black and got the same error message. "Incompatible print cartridge" This is an HP 4500 cartridge. Can you help?
04-10-2013 02:50 PM
I would try a hard reset on the printer.
Follow these steps to perform a hard reset on the printer.
1. Press the Power button to turn on the product.
2. With the product turned on, disconnect the power cord from the rear of the product.
3. Unplug the power cord from the wall outlet.
4. Wait at least 15 seconds.
5. Plug the power cord back into the wall outlet.
6. Reconnect the power cord to the rear of the product.
7. If the product does not turn on by itself, press the power button to turn it on.
If that doesn't work, pull the cartridges out before performing the hard reset. Once it boots back up, it will ask for them, and then you will want to replace them.
Try that and let me know if it helps! If it doesn't, just let me know and I will see what else we can try.
If I have been helpful or if you’d like to say thanks you can click the white star under my name to give me Kudos. I really appreciate it!
Best of luck,
05-30-2013 01:42 PM
I've tried everything in the printer manual, everything on the website troubleshooting and support site, and on the customer forums site and still cannot solve my problem. I keep getting "incompatible print cartridge" displayed. I have new cartridges installed properly, cleaned the areas suggested, and done a "hard" set. Anything else I can try or should I just buy a new printer??
Thank you for your help 🙂
05-31-2013 08:46 AM
@ Logan 3040 - I will need a little more information in order to help out. There a different printers mention throughout the thread. What model of printer is do you own? Dd you have the product plugged directly into in a wall outlet to ensure that the device is getting the proper amount of power? If the machine is not getting enough power that can cause false error messages to occur.
07-22-2013 02:40 PM
Same problem here. Have done everything suggested and still get the incompatible cartridge message. The printer did successfully print after these new cartridges were installed-though just a couple of pages. Printer is a photosmart C4385.