cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
2 1 0 0
Message 1 of 3
87
Flag Post

Solved!

Instant ink service cancelled and now i can't print

HP Recommended
hp 3830

I had the HP instant ink service for a while then cancelled. Billing stopped. However, i bought a ink cartridge from the store and have not been able to print. Instead I keep getting a message requesting that I renew my subscription. This feels like a scam. They encourage you to sign up and then when you opt out, they hold your printer hostage. 

Tags (1)
2 REPLIES 2
Highlighted
HP Support Agent
HP Support Agent
11,735 11,713 926 890
Message 2 of 3
Flag Post
HP Recommended

@yalis, Welcome to HP Support Community!

 

Follow the steps below to isolate and resolve the issue-

 

Reset the printer

  1. Turn the printer on, if it is not already on.
  2. Wait until the printer is idle and silent before you continue.
  3. With the printer turned on, disconnect the power cord from the rear of the printer.
  4. Unplug the power cord from the wall outlet.
  5. Wait at least 60 seconds.
  6. Plug the power cord back into the wall outlet.
  7. Reconnect the power cord to the rear of the printer.
  8. Turn on the printer, if it does not automatically turn on.
  9. Wait until the printer is idle and silent before you proceed

Update the printer firmware

Download available firmware updates from the HP website

With the printer on and connected to the computer, go to HP Customer Support - Software and Driver Downloads, and then identify your printer. Look for and install any available firmware updates. Refer to the document HP Printers - Updating or Upgrading Printer Firmware

 

Try these steps to re-enable the web-services -

 

Step 1 Remove the Web-Services 

1. From the top of the screen, touch or swipe down the tab to open the Dashboard, touch ( HP ePrint ), and then touch (Web Services Settings).

2. Touch Remove Web Services.

 

Reboot the devices.

 

Step 2 Enable the Web-Services 

1. From the top of the screen, touch or swipe down the tab to open the Dashboard, and then touch ( Setup ).

2. Touch Web Services Setup .

3. Touch Accept to accept the Web Services terms of use and enable Web Services.

4. On the screen that appears, touch OK to allow the printer to automatically check for product updates.

5. If the Printer Update Options screen is displayed, select one of the options.

6. When the printer is connected to the server, the printer prints an information page. Follow the instructions on the information page to finish the setup.

 

Hope this helps! Keep me posted. 

 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

TEJ1602
I am an HP Employee

Tags (1)
Highlighted
Author
New member
2 1 0 0
Message 3 of 3
Flag Post
HP Recommended

Sorted!

Thanks

Reply
0 Kudos
Tags (1)
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation