OfficeJet 6958 not printing black - tried all suggestions on board

[Warren-M]

6958 not printing black. Problem started when I replaced factory-installed black carteridge with new HP cartridge. Have tried cleaning the printhead, resetting the printer, firmware is up to date, have cleaned the contacts. Anything else to try?

[Raj1788]

@Warren-M

Thank you for joining the HP Support Community

To provide you with an accurate solution, I'll need a few more details:

Is the copy working fine?

If you are facing the same issue while making a copy follow the below steps.

I suggest you do a Hard Reset on the printer

(1) Turn the printer on, if it is not already on.

(2) Wait until the printer is idle and silent before you continue.

(3) With the printer turned on, disconnect the power cord from the rear of the printer.

(4) Unplug the power cord from the wall outlet.

(5) Wait at least 60 seconds.

(6) Plug the power cord back into the wall outlet.

NOTE: HP recommends connecting the printer power cord directly to the wall outlet.

(7) Reconnect the power cord to the rear of the printer.

(8) Turn on the printer, if it does not automatically turn on.

The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

Clean the printhead

The printhead could be clogged, and you might need to clean the printhead several times to restore print quality. Use an automated tool from the printer control panel to clean the printhead.

   CAUTION: 

Never turn off the printer when ink cartridges are not installed. To avoid issues that require cleaning the printhead or that can damage the ink system, always replace ink cartridges as soon as possible, and always turn off the printer using the Power button.

1. From the printer control panel, open the Setup  menu.

2. Open the Printer Maintenance menu.

3. If necessary, open the Tools menu, and then touch Clean Printhead.

   A test page prints.

   

4. Examine the test page.

   • If the print quality is unacceptable, touch Clean Again to continue the next level of cleaning. If necessary, repeat these steps for the third cleaning cycle.

     NOTE: 

     If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes before you perform all three levels of cleaning again.

   • If the print quality is acceptable, touch Done.

Try to print. 

Use this document: https://support.hp.com/us-en/product/hp-officejet-6950-all-in-one-printer-series/9666193/model/96661... for your reference. 

Keep me posted, how it goes!

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Have a great day!

Cheers:)

[Warren-M]

Copy is NOT working. Resetting the printer, cleaning the printhead have not restored black. Tried cleaning again, and now it seems to be hung on the 2nd level cleaning.

[Raj1788]

@Warren-M

Appreciate your efforts, this could be a hardware issue with the printer.

I would personally suggest you contact our HP Support for one on one interaction. 

Please use the following link to create yourself a case number, then call and it may help speed up the call process:

Step 1. Open link: www.hp.com/contacthp

Step 2. Sign in / sign in as a guest

Step 3. Enter the product number or select to auto detect

Step 4. Scroll down to "Still need help? Complete the form to select your contact options"

Step 5. Scroll down and click: HP contact options - click on Get phone number and phone number appear.

Keep me posted on further assistance. Hope that helps! 

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Have a great day ahead!

[acgroom]

I performed all maintenance and troubleshooting options listed on this site and nothing worked.

[The_Fossette]

@acgroom,

Welcome to the HP Support Community!

I assure you I will try my best to get this sorted.

In order that I may provide you with an accurate solution, I will need a few more details and I would appreciate if you could, perhaps elaborate on your concern.

• What is the exact model for your printer?
• What is the operating system you are using?
• What is the exact issue you are facing?
• Have you made any software or hardware changes on the computer?
• Have you performed any troubleshooting steps before posting?

Look forward to hearing from you and you have a great day!

Take care.

Cheers!