cancel
Showing results for 
Search instead for 
Did you mean: 
Mel_H
New member
1 0 0 0
Message 1 of 4
668
Flag Post
HP Recommended

PageWide Pro 577 freezes

Pagewide Pro 577DW
Microsoft Windows 10 (64-bit)

I have the same problem others have reported.

 

No solution has been forthcoming from HP.

 

I have a Pagewide Pro 577DE - other report the same problem on the 477DW.

 

After printer goes to sleep, it won;t wak up when trying to print and even the LCD control screen does not respond to touches. And, the power button also doesn't work.

 

You need to pull the plug and replug to get it to work again.

3 REPLIES 3
Retired rick-s
Retired
2,526 2,501 105 381
Message 2 of 4
447
Flag Post
HP Recommended

PageWide Pro 577 freezes

Thread opened for response.

I work on behalf of HP.
Reply
0 Kudos
f2point8
Level 5
146 140 10 89
Message 3 of 4
426
Flag Post
HP Recommended

PageWide Pro 577 freezes

Greetings everyone,

 

HP has created a new firmware update for the HP PageWide 377dw, HP PageWide Pro 477dw/dn, and HP PageWide Pro 577dw/57750dw products to help mitigate the “Unable to Wake from Standby Mode” problem that some users experience after updating to version 001.1839A firmware (and also on certain older versions). 

 

The specific change included in this new firmware release adds the ability to set the Power Management Energy Save “Standby After” setting to “Never” as shown here:

 

                SETTING STANDBY TO “NEVER”

StandbyNever.jpg

 

Changing the Energy Save Setting to Standby After “Never” will prevent the device from entering Standby Mode, and therefore prevent the problem of not being able to wake up from Standby Mode.

 

Getting the New Firmware

If your printer is not set to update automatically and/or has not already been updated, you can manually check for the update via the Embedded Web Server (EWS) on the product.

 

To check the version of firmware on your printer, enter the IP address of your printer into your web browser to view the EWS, then select the "Tools" tab, then select "Printer Updates", and then "Firmware Updates" on the left panel. 

 

The firmware version which provides the ability to set the Standby time to "Never" has the characters of "1850B.00" at the end of the firmware version.  If your printer has a lower version number, go to the "Check for Printer Updates" section lower on the page and click on the "Check Now" button, then follow the prompts to download and install the printer update.

Kent G.
HP Retired, however my posts and replies are my own, not HP's.
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!
Reply
0 Kudos
luifertx
New member
1 1 0 0
Message 4 of 4
70
Flag Post
HP Recommended

PageWide Pro 577 freezes

hi can you help me with my printer. I plug the printer the only screen I see is the hp logo and then the screen go off. is sleep mode I believe. the side side bottoms are on and the off bottom is on thanks!  

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation