• ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Experiencing 'Printer Blocked' or 'Printer Error' message? Click here for more information.
Check some of the most frequent questions about Instant Ink: HP INSTANT INK, HP+ PLANS: INK AND TONER.


Check out our Black or Color Ink Not Printing, Other Print Quality Issues info about: Print quality and Cartridge Issues.
HP Recommended
Ofice Jet 6954ple: Pavilion 65XX
Microsoft Windows 10 (64-bit)

Was working,   but no yellow.   All new  HP cartridges.  Test print no black, no yellow- missing black lines - broken lines on box in middle.

I  un installed & re installed

 

1 REPLY 1
HP Recommended

@rrom33, Welcome to the HP Support Community!

 

Try making a standalone copy and check if that works. By this, we can conclude if this is a hardware or a driver issue.

Make sure the protective plastic tape from the ink cartridges is removed before inserting it into the printer.

 

Let us try these steps:

 

Reset the printer

  1. With the printer turned on, disconnect the power cord from the rear of the printer.
  2. Wait at least 60 seconds.
  3. Reconnect the power cord to the rear of the printer.
  4. Turn ON the printer, if it does not automatically turn on.
  5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

 

Check the estimated ink levels

On the printer control panel, touch the Ink Level Indicator icon . The control panel displays estimated ink levels. Replace any low or empty cartridges.

 

Clean the printhead

  1. om the printer control panel, open the Setup  menu.

  2. Open the Printer Maintenance menu.

  3. If necessary, open the Tools menu, and then touch Clean Printhead.

  4. If the print quality is unacceptable, touch Clean Again to continue the next level of cleaning. If necessary, repeat these steps for the third cleaning cycle.

  5. NOTE: If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes before you perform all three levels of cleaning again.

Also, perform step 9 mentioned in this document. 

 

Print a Print Quality Diagnostic Page

  1. From the printer control panel, open the Setup  menu.

  2. Open the Reports or Tools menu.

  3. Touch Print Quality Report.

Let me know how this goes.

 

If you feel my post solved your issue, please click “Accept as Solution”, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

KUMAR0307
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.