cancel
Showing results for 
Search instead for 
Did you mean: 
syehs
New member
1 0 0 0
Message 1 of 2
54
Flag Post
HP Recommended

Printer stops after one job

HP Photosmart D110
Microsoft Windows 10 (64-bit)

The printer stops printing after one job. The job is stuck in the queue after printing. Using the scan doctor resolved the issue but it needs to be done every single time. Is there a way to permanently fix the problem. 

1 REPLY 1
HP Support Agent
HP Support Agent
19,555 19,544 1,293 1,958
Message 2 of 2
17
Flag Post
HP Recommended

Printer stops after one job

@syehs,

 

Welcome to the HP Support Community!

 

I reviewed your post and I understand that the printer stops printing after the first page.

 

Don’t worry, I assure you I will try my best to get this sorted.

 

I recommend you follow the below steps and check if it helps.

 

  1. With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet. 
  2. Remove USB cable, if present. 
  3. Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge. 
  4. Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer. 
  5. Turn on the printer and wait till warm-up period finishes and the printer is idle.

 

If you continue facing the issue, then root uninstall the printer and then reinstall and check.

 

Here is how it is done.

 

1.) In Windows, search for and open Programs and features

2.) Select your HP Printer

3.) Select Uninstall

4.) In Windows, search for and open Devices and printers

5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose 'Delete' or 'Remove Device'

6.) Open up the run command with the "Windows key + R" key combo.

7.) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”)

8.) Click on the "Drivers" tab

9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom

10.) Select Ok

11.) Select Apply and Ok on the Print Server Properties windows

12.) Close Devices and Printers

13.) Restart the PC

14.) Download and install the printer software from the below link.

 

https://ftp.hp.com/pub/softlib/software13/COL32503/mp-109779-3/Full_Webpack-140.0.408-5-PS_AIO_07_D1...

 

Let me know how it goes and you have a great day!

 

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

 

Cheers!

 

The_Fossette
I am an HP Employee

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation