cancel
Showing results for 
Search instead for 
Did you mean: 
printingnovice
Level 2
10 7 2 0
Message 1 of 4
205
Flag Post
HP Recommended

Solved!

Printhead cleaning

Officejet 7510
Microsoft Windows 10 (64-bit)

My Officejet 7510 gives an error message B8BDEEDE and staes there is a printhead problem. how can I clean the printhead as I cannot locate any latch handle. This is a European model. Is it diferent from the US model?

3 REPLIES 3
HP Support Agent
HP Support Agent
11,221 11,199 762 747
Message 2 of 4
188
Flag Post
HP Recommended

Solved!

Printhead cleaning

@printingnovice

 

Let's start with a printer Reset

 

- With the printer turned on, disconnect the power cord from the rear of the printer and from the wall outlet or power strip.
- Wait at least 60 seconds.
- Plug the power cord back into the wall outlet.
NOTE: HP recommends connecting the printer power cord directly to a wall outlet.
- Reconnect the power cord to the rear of the printer.
- Turn on the printer, if it does not automatically turn on.
- The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
- Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

 

Also ensure the printer has the latest Firmware update. Link: https://support.hp.com/in-en/document/c02919168

 

Next try cleaning the printer.

 

  1. Load U.S. letter or A4 size, plain white paper into the input tray.

  2. On the printer control panel, swipe the display to the left, and then touch Setup (). The Setup menu displays.

  3. Swipe the display up, and then touch Printer Maintenance.

  4. Touch Clean Printhead. A test page prints.

Keep me posted 😊


If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.

KrazyToad
I Am An HP Employee

Reply
0 Kudos
printingnovice
Level 2
10 7 2 0
Message 3 of 4
180
Flag Post
HP Recommended

Solved!

Printhead cleaning

Thanks for the reply. The printer firmware is automatically updated.

I have tried to use the clean printhead routine but all that happens is it gives the error message

OXC19a0015 - there is a problem with the printhead.

Reply
0 Kudos
HP Support Agent
HP Support Agent
11,221 11,199 762 747
Message 4 of 4
170
Flag Post
HP Recommended

Solved!

Printhead cleaning

@printingnovice

 

At this point I suggest you contact HP Support for Service Options

 

Click on this link - www.hp.com/contacthp/ and select your Country to get the Contact details for HP Support

 

If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.

KrazyToad
I Am An HP Employee

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation