Printing Blank Pages

[Lucille59]

Hi Everyone!

I need help with my Deskjet 3733. It keeps on ptinting blank pages. I tried following the "help" steps, changed the cartriges, cleaned printheads (in which case it did print a sample page) but whenever I'm sending it something to be printed: blank. Any ideas?

Many thanks,

Lucille

[Jeet_singh]

@Lucille59,

Welcome to the HP Forums 🙂 I would like to take a moment and thank you for using this forum, it is a great place to find answers. For you to have the best experience on the HP forum, you could also visit our HP Forums Guide for First Time Here? Learn How to Post and More. I understand you are having issues while printing blank pages from your HP DeskJet printer. Don't worry as I have a few suggestions which should help you resolve this issue.

To provide you with an accurate solution, I'll need a few more details:

Have you recently made any changes on the printer before the issue started?

Are you using genuine HP ink cartridges or refilled cartridges?

Are you able to make a copy from the printer?

In the meantime, let's try these steps here: 

Please make sure that the printer is connected directly to the wall outlet and not to the surge protector.

Remove all the ink cartridges and then try to perform a hard reset on the printer.

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

Remove USB cable, if present.

Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Turn on the printer and wait till warm-up period finishes and the printer is idle.

Now insert the ink cartridges and then try to print a test page and check if it works.

Let’s first try and make a “photocopy” to determine whether the issue is with the printer or not. Place a document on the scanner glass and choose “Copy” option. If the printer is making a good copy, then the printer hardware is fine.

If the copy comes out bad, then I would suggest here is to follow all the steps suggested in the support document for - HP DeskJet 3700 Printers - Fixing Poor Print Quality (This document includes the steps which are suggested for color or black not printing).

If the copy comes out fine, then it looks like an issue with the print drivers. If you're running Windows, I would suggest here is to uninstall the printer drivers from the root level and then reinstall the printer by following the steps below: 

• Press “Windows key” + “r” to get the “Run” window.
• Type "services.msc" to get Services – Go to “Print spooler” – Right-click and “Stop” the service.
• Now again open "Run" - Type “spool” and ok - Go to PRINTERS folder - delete everything in that folder.
• Go to services again - Start the print spooler.
• Now check for issue resolution.
• If the issue persists, also try clean installing the printer drivers. Here are the steps:
• First, unplug the USB cable from the printer if present.
• Go to Control panel – Programs and feature – Select all the HP DeskJet printer entries and uninstall them.
• Now go to Control panel – Devices and printer – Select all the printer entries and remove the device.
• Press the "windows key" + "r" to get the "Run" window open - Type "printui.exe /s" (There is a space between .exe & /) and press enter.
• Under print server properties, go to drivers - remove any entry there as well.
• Again, go to the Run window, type – “c:/programdata” – Go to Hewlett Packard folder, remove any printer related folders & files.
• Restart your computer.
• Please click here (Please select the Operating system and version of Windows before downloading and installing the full feature software for this printer).
• Connect the USB cable if prompted and follow the on-screen instructions to complete the installation.

Please let me know if this resolves the issue, or if you require further assistance!

Eagerly waiting for your response!

that said, If the information I've provided was helpful, 

give us some reinforcement by clicking the solution and kudos buttons, 

that'll help us and others see that we've got the answers!

Good Luck.