cancel
Showing results for 
Search instead for 
Did you mean: 
Goldbal
New member
1 0 0 0
Message 1 of 2
45
Flag Post
HP Recommended

Setup cartridge

Hp b210a all in one printer
Microsoft Windows 10 (64-bit)

Hi I have hp b210a  I had replace  printhead after it shows me  put the setup cartridge comes with your printer but I don’t have that I ordered form net but same error I reset my printer several time but not work please help me what should I do  thanks 

1 REPLY 1
HP Support Agent
HP Support Agent
18,386 18,294 1,048 1,151
Message 2 of 2
19
Flag Post
HP Recommended

Setup cartridge

@Goldbal

 

Welcome to HP support community.

 

Remove and reinsert the ink cartridges

  1. Turn on the printer.

  2. Open the door to access the ink cartridges.

  3. Wait until the carriage is idle and silent before you continue.

  4. Push the tab on an ink cartridge, and then pull the ink cartridge from its slot.

       CAUTION: 

    Do not leave the ink cartridges outside the printer longer than 30 minutes. Doing so can result in damage to both the printer and the ink cartridges.

    Removing an ink cartridge from the printhead

  5. Reinsert the ink cartridge into its color-coded slot, and then press down on it until it snaps into place.

     Inserting the ink cartridge into place

  6. Repeat these steps to remove and reinsert the remaining ink cartridges.

  7. Close the ink cartridge access door.

You can refer this HP document for more assistance:- Click here

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation