cancel
Showing results for 
Search instead for 
Did you mean: 
BDPGMR Student
Student
1 0 0 0
Message 1 of 2
34
Flag Post
HP Recommended

black ink white streaks

Envy 5055
Other

Changed cartilage out to remove white streaking (part of lettering missing across page), printed test, alignment, and a couple more needed pages; and everything looked great. Approximately two months later, streaking of black returned. When I first performed cleaning & deep cleaning, NO black ink was printed? Waited 24hrs and, using printer properties (1903 windows 10), printed a test page. Black ink showed back up but streaking came back. Performed cleaning / deep cleaning three more times. Printer reporting black ink full. Color ink printing ok but black ink still showing streaking...

1 REPLY 1
Dean
Dean
11,364 11,338 756 1,415
Message 2 of 2
16
Flag Post
HP Recommended

black ink white streaks

Get a plastic dish and put 1/4" of hot water in it.  
Remove the black cartridge and put the print nozzle down into the water.  
Let it soak for five minutes, then remove and clean the contacts with a lint free wipe.  (coffee filter)
Put it back in the printer and run a cleaning cycle.

If you still have streaks then you will need a new cartridge.

----------------------------------------------------------------------------------
Please mark the post that solves your issue as "Accept as Solution".
I am a volunteer.
Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation