cancel
Showing results for 
Search instead for 
Did you mean: 
Gary111
New member
1 0 0 0
Message 1 of 2
67
Flag Post
HP Recommended

error Message 0XB80003E8 on HP 4630 printer-Does NOT resolve

Re Started printer - unplugged printer - ran trouble shooter - will not resolve

1 REPLY 1
HP Support Agent
HP Support Agent
18,503 18,411 1,056 1,154
Message 2 of 2
28
Flag Post
HP Recommended

error Message 0XB80003E8 on HP 4630 printer-Does NOT resolve

@Gary111

 

Welcome to HP support community.

 

Remove the ink cartridges, and reset the printer

  1. Remove the ink cartridges from the printer.

  2. With the printer turned on, disconnect the power cord from the printer.

  3. Unplug the power cord from the power source.

  4. Wait at least 60 seconds.

  5. Reconnect the power cord to a wall outlet and to the printer.

    NOTE: 

    HP recommends plugging the printer directly into a wall outlet.

  6. Turn the printer on.

  7. Reinsert the ink cartridges, and then close the ink cartridge access door.

  8. If you receive a prompt to print a calibration or alignment page, do so.

You can refer this HP document for more assistance:- Click here

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation