02-11-2020 11:43 AM
Since 1 month (only) getting the error code OXB032B5AC when trying to print (wireless) ! Any solution ?? Tks
02-13-2020 01:20 PM
I have gone through your Post and would like to help
I suggest you download and run the HP Print And Scan Doctor from this Link: ftp://ftp.hp.com/pub/printers/hppsdr/patches/HPPSdr.exe
Run PSDR v5.0.2
Once the PSDR detects the Printer, it will show up the IP address and Software Status.
Select the correct Printer and click on Next.
PSDR will check if the Printer is on the Network and communication between the PC and the Printer. Once the connection check is done, click on Fix Printing
Once PSDR goes through all checks and automatic fixes, click on Print a test page.
Regardless if PSDR printed the test page or not, click on “NO PRINT”
PSDR will then notify you that there is an update available, click on continue, and PSDR will apply the patch and ask for a reboot.
Post restart the PSDR will run automatically to check for more issue. If no issue found close PSDR.
Also ensure the printer has the latest Firmware. you can refer to this Link: https://support.hp.com/in-en/document/c02919168
Keep me posted how it goes 😊
If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community
I Am An HP Employee