-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Printers
- Printing Errors or Lights & Stuck Print Jobs
- error message in my hp deskjet ink advantage 3545 ERROR C...
Create an account on the HP Community to personalize your profile and ask a question
11-09-2015 06:09 AM
HI
HOW TO GET SOLUTION FOR ERROR ON MY HP DESKJET 3545 ERROR CODE 0X83C0000A NOS_LOADER_APP
Solved! Go to Solution.
Accepted Solutions
11-09-2015 09:42 AM
Hello,
Please try the below steps...
- While the printer is ON, remove the cartridges.
- Remove all the papers in the tray. Close the tray.
- While the printer is ON, unplug the power cord from back of the printer.
- Power Off the Wireless router.
- Wait for 60 seconds.
- Plug in the power cord to printer.
- When prompted, install the cartridges.
- If error still exists, then it is a printer hardware failure. Kindly call HP Tech Support for further assistance.
HP Tech Support ( USA ) 1-800-474-6836
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.
11-09-2015 09:42 AM
Hello,
Please try the below steps...
- While the printer is ON, remove the cartridges.
- Remove all the papers in the tray. Close the tray.
- While the printer is ON, unplug the power cord from back of the printer.
- Power Off the Wireless router.
- Wait for 60 seconds.
- Plug in the power cord to printer.
- When prompted, install the cartridges.
- If error still exists, then it is a printer hardware failure. Kindly call HP Tech Support for further assistance.
HP Tech Support ( USA ) 1-800-474-6836
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.
01-01-2017 05:47 PM
Hello,
Please click HERE to access the steps that should resolve the issue .
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.
03-24-2018 05:47 AM
To remove ink cartridge , kindly ensure to have the printer powered on.
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.
10-16-2019 12:17 AM - edited 10-16-2019 12:19 AM
The following HP printer error code 0x83c0000a indicates a type of printer malfunction, wherein the printer’s power button light will constantly keep flashing. During the error message on your printer, users cannot operate the device for any purpose, therefore resolving this error will only be the solution.
12 steps to resolve this error:
- Turn the printer ON
- Now wait until HP printer get fully ready and turn silent
- Disconnect the USB wire from both ends if connected any
- Remove the ink-cartridges while the printer is ON
- Now close the printer door and remove power cord from the rear, also remove it from power supply source as recommended by HP officials
- Wait for couple of minutes before reconnecting it to power
- Reconnect HP printer to power outlet and manually reboot it if does not come ON its own
- Now wait until your printer completes its normal process of warm-up and open the main door to reinstall ink-cartridges
- After completing the reinstallation of ink-cartridges, your printer may prompt to align or calibrate the ink system, if yes, then proceed with it
- Now reconnect the USB wire if required, wireless printers will not require USB wire
- Open HP printer application and try to print a test page
Didn't find what you were looking for? Ask the community