cancel
Showing results for 
Search instead for 
Did you mean: 
bhave55
New member
1 0 0 0
Message 1 of 2
49
Flag Post
HP Recommended

hp 6600 printer problems and windows 10 update

HP Deskjet all in one printer, fax scanner
Microsoft Windows 10 (32-bit)

Hp Deskjet all in one 6600 stopped printing after MS Windows Update in Dec. Tried to uninstall Win 10 update and printer still not operating correctly. 

1 REPLY 1
HP Support Agent
HP Support Agent
2,157 2,157 98 175
Message 2 of 2
16
Flag Post
HP Recommended

hp 6600 printer problems and windows 10 update

@bhave55 Welcome to HP Community!

 

I understand that you are unable to print after windows update.

 

Please let me know if you are getting any error message.

How the printer is connected to the computer?

 

Please perform the hard reset and check for the issue.

 

  1. Turn the printer on, if it is not already on. 

  2. Wait until the printer is idle and silent before you continue. 

  3. With the printer turned on, disconnect the power cord from the rear of the printer. 

  4. Unplug the power cord from the wall outlet. 

  5. Wait at least 60 seconds. 

  6. Plug the power cord back into the wall outlet. 

  7. Reconnect the power cord to the rear of the printer. 

  8. Turn on the printer, if it does not automatically turn on. 

  9. Wait until the printer is idle and silent before you proceed 

 

Please try to update the firmware and check.

 

Keep us posted,

If you would like to thank us for our efforts to help you, 


Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 


Have a great day!

 

 

 

 

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation