printer wont print receive message printer needs user intervention

[dotcomma]

printer wont print receive message printer needs user intervention

[Kumar0307]

Hi @dotcomma

Welcome to the HP Support Community. I'd be happy to assist you. 

 It seems like the printer is in error state. Let us try these steps:

Reset the printer

1. With the printer turned on, disconnect the power cord from the rear of the printer.
2. Wait at least 60 seconds.
3. Reconnect the power cord to the rear of the printer.
4. Turn ON the printer, if it does not automatically turn on.
5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

Run HP Print and Scan Doctor to diagnose and fix any driver issue

Click here to download the file. Once downloaded, make sure to run the file to start the installation and click on 'Fix printing'.

If the issue persists, proceed to the next step.

Check the ink levels on the printer

On the printer control panel, touch the Ink icon  to display the current estimated ink levels. Replace any low or empty ink cartridges.

Try making a standalone copy and check if that works. By this, we can conclude if this is a hardware or a driver issue.

If the issue persists, check for any jams inside the printer

Refer to this document.

Try printing.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day!