printhead problem is what it says after partial printing

[Lovelyone67]

Printer has error message ...."printhead problem"...please help

[KrazyToad · Accepted solution]

@Lovelyone67

Welcome to HP Support Forums. A really great platform for posting all your questions and finding solutions.

I understand that you are getting a Printhead error

I'll try my best to help

Are you using original HP cartridges?

Please Clean the ink cartridge vents and contacts. Cleaning the ink cartridge contacts and vents, and then reinstalling the ink cartridges one at a time can help determine if a specific ink cartridge is causing the error message.

1. Examine the vent area located on top of the ink cartridge, next to the HP logo.

   Figure : Example of the vent area

   

2. If any of the ink cartridges have clogged vents, use a pin to clean the vents.

   Figure : Example of a clogged vent

   

   Figure : Example of a clean vent

   

3. Use a fresh, lightly dampened, lint-free cloth to wipe any accumulated ink and debris on the copper-colored contact on the ink cartridge.

      CAUTION: Be careful to wipe only the ink cartridge contacts. Do not smear any ink or debris elsewhere on the ink cartridge.

   

Also perform a Printer Reset and download the Firmware from this Link: https://hp.care/2tzyiAY

(1) Turn the printer on, if it is not already on.
(2) Wait until the printer is idle and silent before you continue.
(3) With the printer turned on, disconnect the power cord from the rear of the printer.
(4) Unplug the power cord from the wall outlet.
(5) Wait at least 60 seconds.
(6) Plug the power cord back into the wall outlet.
 NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
(7) Reconnect the power cord to the rear of the printer.
(8) Turn on the printer, if it does not automatically turn on.

The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
Wait until the warm-up period finishes and your printer is idle and silent before you proceed

If the issue persists, please contact our Phone Support for Service Options

1) Click on this link - https://hp.care/2Hox03J;
2) Click on "Continue as guest". 
3) Enter the serial of your device. 
4) Select the country from the drop-down. 
5) Click on "Show Options". 
Fill the web-form. A case number and phone number will now populate for you.

You can refer to this Link: https://hp.care/2pvmFqQ

Keep me posted how it goes

Thank you 🙂

If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" 

[Lovelyone67]

Thank u very much...it worked

[KrazyToad]

@Lovelyone67

I'm glad you were able to get this issue resolved

Do visit our HP Forums and drop us a message anytime you need help

Thank you 🙂