cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
1 0 0 0
Message 1 of 2
48
Flag Post

printing 6by 4

HP Recommended
hp envy 5540 all in one
Microsoft Windows 10 (64-bit)

recently, I cannot print from the 6 x 4 photo compartment in my printer! I get the message...no paper or blocked..i have tried everything ! a4 printing is not a problem !

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
11,107 11,093 610 450
Message 2 of 2
Flag Post
HP Recommended

@teajenny1

 

Welcome to the HP Support Community.

 

Is this only happening while printing photos or even with normal documents?

 

Follow these steps to clean the paper feed rollers.

  1. Remove any paper in the printer before you clean the rollers.

  2. Press the Power button to turn off the printer, if it is not off already.

  3. Disconnect the power cord from the rear of the printer.

       WARNING: 

    You must disconnect the power cord before reaching inside the printer to avoid risk of injuries or electric shock.

  4. Open the cartridge access door.

    Figure : Open the cartridge access door

    Image: Open the cartridge access door
  5. Locate the paper path cover, grasp the handle, and then lift up to remove it.

    Figure : Remove the paper path cover

    Image: Remove the paper path cover
  6. Lightly dampen a clean swab with the water, and then squeeze any excess liquid from the swab.

  7. Press the swab against the rollers inside the printer, and then rotate the rollers upwards with your fingers. Apply a moderate amount of pressure to remove any dust or dirt buildup.

    Figure : Clean the rollers in the paper path access area

    Image: Clean the rollers in the paper path access area
  8. Replace the paper path cover, and then close the cartridge access door.

    Figure : Close the cartridge access door

    Image: Close the cartridge access door
  9. Gently turn the printer onto its right side, and then pull open the input tray so that you can access its underside.

    Figure : Turn the printer onto its right side

    Image: Turn the printer onto its right side
  10. Lightly dampen a clean swab with the water, and then squeeze any excess liquid from the swab.

  11. Clean the rollers in the gap behind the input tray. Make sure that none of the rollers are not missing, that they turn easily, and that they are springy when you press them.

    Figure : Clean the rollers behind the input tray

    Image: Clean the rollers behind the input tray
  12. Before you turn the printer over to its normal position, continue to the next step to clean the paper pick rollers.

Step 2: Clean the paper pick rollers

Follow these steps to clean the paper pick rollers.

  1. Make sure that the printer is turned off, the power cord is disconnected, and the printer is turned onto its right side with the input tray open.

  2. Lightly dampen a clean swab with the water, and then squeeze any excess liquid from the swab.

  3. Press the swab against the rollers inside the printer, and then rotate the rollers upwards with your fingers. Apply a moderate amount of pressure to remove any dust or dirt buildup.

    Figure : Clean the paper pick rollers

    Image: Clean the paper pick rollers
  4. Make sure that the rollers turn easily when you press them.

  5. Allow the rollers to dry for 10 to 15 minutes.

  6. Turn the printer over to its normal position.

  7. Reconnect the power cord to the rear of the printer, and then press the Power button to turn on the printer.

If the issue persists, please perform the remaining steps from this document: https://support.hp.com/in-en/product/hp-envy-5540-all-in-one-printer-series/5447939/document/c043564...

 

Let me know if this helps.

 

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

 

Thanks!

Have a great day!

 

 

 

 


I am an HP Employee

0 Kudos
Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation