wireless printer connection error

[vstr86]

i am using hpdeskjet ink advantage 4535 and my serial number is TH61J3C11Z
When i try to print through wireless connection (both laptop and printer are connected with the same wifi ) it throws the following message and crashes my laptop.

"function address 0x00007ffcabb4a839 caused a protection fault (exception code 0xe06d7363). The application property sheet page may not function properly"

[TEJ1602 · Accepted solution]

@vstr86, Welcome to HP Support Community!

I understand you have issues with printing from your computer to the printer wirelessly, let us try to isolate the issue and resolve it.

Try printing from a different application, if the issue persists, follow the steps below-

Restart the devices

1. Turn the printer off, and then wait 10 seconds.
2. Disconnect the printer power cord from the printer.
3. Turn off the computer or the device you are trying to print from.
4. Connect the printer power cord to the printer, and then turn on the printer.
5. Disconnect the power cord from your wireless router, and then wait 10 seconds.
6. Reconnect the power cord to the router. Wait until Internet service is restored. Internet service is interrupted while the router is off.
7. Turn on the computer.

Use HP Print and Scan Doctor

Download HP Print and Scan Doctor and run the program. It will automatically diagnose and fix any printing/scanning issues.

For more information, go to https://support.hp.com/us-en/topic/printscandoctor

If the issue persists, I recommend you delete the driver and root level and retry, follow the steps below: 

1) In Windows, search for and open Programs and features 

2) Select your HP Printer 

3) Select Uninstall 

4) In Windows, search for and open Devices and printers 

5) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’ 

6) Open up the run command with the “Windows key + R” key combo. 

7) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe”

😎 Click on the “Drivers” tab 

9) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom 

10) Select Ok 

11) Select Apply and Ok on the Print Server Properties windows 

12) Close Devices and Printers.

Use this link to download and install the new driver. Configure the printer and try printing.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping.