Cartridge tray will not come out.

[MrAl2]

Cartridge tray will not come out when the blue handle is pulled.

[Kumar0307]

@MrAl2, Welcome to the HP Support Community!

Perform a Power Reset

1. With the printer turned on, disconnect the power cord from the rear of the printer.
2. Wait at least 60 seconds.
3. Reconnect the power cord to the rear of the printer.
4. Turn ON the printer, if it does not automatically turn on.
5. Wait until the printer is idle and silent before you proceed.

Note: HP recommends connecting the printer directly to a wall outlet rather than a surge protector or a power strip.

Refer to this document to know how to pull out the toner cartridge drawer and replace a Toner.

Check for any obstructions or damages to the Blue handle.

If the issue persists, please contact our HP Support team for Service Options as it could be a possible hardware issue:

1) Click on this link - https://support.hp.com/us-en/contact-hp?openCLC=true

2) Select your product type below.

3) Enter the serial of your device.

4) Select the country from the drop-down.

5) Select the appropriate option based on your preference.

6) Fill the web-form and proceed further.

Keep me posted for any other assistance.

If you feel my post solved your issue, please click “Accept as Solution”, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!