HP GT5820 air in tube system for ink tank printer. ( Re-Prime, Required)

[AhmedSS]

Hi.

I have air in the contiuos ink system of my HP GT 5820,  I would like to know the procedure to re-prime the system.
My print heads are new and dont need replacing I just need to re-prime it.

If you have the procedure to re-prime please send it to me.

Thanks and Regards.

Ahmed

[The_Fossette]

@AhmedSS,

Welcome to the HP Support Community!

Follow the steps in the below article to perform the priming process.

https://support.hp.com/us-en/product/hp-deskjet-gt-5820-all-in-one-printer-series/8109015/document/c...

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

Cheers!

[AhmedSS]

this proceedure says i need to replace my printheads

I need to re-prime the existing printheads without replacing them.

is there a way?

if not please send me the procesure for a full printer reset, because i also forgot my printer settings password and username. 

[The_Fossette]

@AhmedSS,

I recommend you contact support and they will assist you in this regard.

Here is how you can get in touch with tech support.

1)Click on this link - www.hp.com/contacthp/

2)Select the product type.

3)Enter the serial number of your device or select let HP detect your product option.

4)Select the country from the drop-down.

5)You should see the HP phone support number or Chat option listed.

Good day! Take care 🙂

Cheers!