cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Level 2
9 6 2 0
Message 1 of 2
61
Flag Post
HP Recommended

HP LJ M605 Grinding noise and No Feed Tray 2

Enterprise M605
Microsoft Windows 10 (32-bit)

I was wondering what would be causing the issue of jamming from Tray 2 to Tray 3 in this particular printer and there seems to be a grinding noise coming from either the Registration rollers or the Paper Feed Unit itself.  The printer is able to print fine with Tray 1 since its bypassing but it will jam up coming from Tray 2 onward.  Could the Paper Feed Unit just be broken and needs to be replaced or could it be something that is jammed up into it?  One test that I did do what use some card stock with Tray 2 removed and jammed it up into the guide in the machine and it fed through fine by that means.  The trays are lifting and the rollers on the tray and the machine are in great condition and are moving with tests running.

1 REPLY 1
Highlighted
Level 11
Level 11
3,828 3,812 400 815
Message 2 of 2
57
Flag Post
HP Recommended

HP LJ M605 Grinding noise and No Feed Tray 2

Try using the component test in the troubleshooting menu to rotate the individual components and isolate the error.

I would add that the only grinding we have experienced on this engine are related to drum drive motor and associated drive train, but as you state you can print from tray 1 that is less likely to be an issue.

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation