HPLaserJet Pro200 M251nw

[amshaba2]

The Printer won’t power on

[Betty0610]

@amshaba2

Welcome to the HP Support Community.

Unplug the printer to reset the power module, plug another appliance into the wall outlet to test the power, and then reconnect the printer.

1. Disconnect the power cord from the rear of the printer.

2. Unplug the power cord from the wall outlet, power strip, or surge protector.

3. While the printer is unplugged, plug another appliance into the wall outlet, and then turn it on to make sure the outlet works.

   • If the wall outlet does not work, plug the printer into an outlet that does work. Do not use a power strip or surge protector.

   • If the wall outlet works, continue with these steps.

4. After the printer has been disconnected for at least 60 seconds, reconnect the power cord to the rear of the printer.

5. Plug the power cord directly into the wall outlet. Do not use a power strip or surge protector.

6. Turn the printer on.

If the issue persists, please perform the remaining steps from this document: https://support.hp.com/us-en/product/hp-laserjet-pro-200-color-printer-m251-series/5097632/model/509...

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

Thanks!

Have a great day!