cancel
Showing results for 
Search instead for 
Did you mean: 
JULES14435
New member
1 0 0 0
Message 1 of 2
124
Flag Post
HP Recommended

JAM IN OUTPUT BIN

HP LASER JET PRO MFP M227
Other

SAYS I HAVE A JAM IN THE OUTPUT TRAY AND I KNOW THERE IS A PAPER IN THERE BUT SEE NOTHING AND DON'T KNOW HOW TO FIX IT:(

1 REPLY 1
HP Support Agent
HP Support Agent
6,259 6,246 337 247
Message 2 of 2
75
Flag Post
HP Recommended

JAM IN OUTPUT BIN

@JULES14435

 

Welcome to the HP Support Community.

 

Let's try to reset the Printer here:

 

Turn the printer on, if it is not already on.

  1. Wait until the printer is idle and silent before you continue.
  2. With the printer turned on, disconnect the power cord from the rear of the printer.
  3. Unplug the power cord from the wall outlet.
  4. Wait at least 60 seconds.
  5. Plug the power cord back into the wall outlet.
  6. NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
  7. Reconnect the power cord to the rear of the printer.
  8. Turn on the printer, if it does not automatically turn on.
  9. Wait until the printer is idle and silent before you proceed.

If the issue persists, please perform the remaining steps from this document: https://support.hp.com/in-en/product/hp-laserjet-pro-mfp-m227-series/9365384/document/c05240248

 

Let me know if this helps.

 

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

 

Thanks!

Have a great day!


I am an HP Employee

0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation