My Color LaserJet Pro MFP M277dw using Windows 10 will not let me print envelopes.

[Chanda72]

My Color LaserJet Pro MFP M277dw using Windows 10 will not let me print envelopes. It keeps telling me to load the paper tray and I have with number 10 envelopes. It printed one and then won't print any others.  Any suggestions?

[sandytechy20]

@Chanda72

Welcome to HP support community.

Clean the paper pick rollers

1. Turn off the printer.

2. Wait until the printer is idle and silent, and then disconnect the power cord and any cables from the rear of the printer.

3. Remove the paper stack from the input tray.

4. Lift the printer and place it on its side or back.

5. Pull out the paper tray, and then locate the gray paper pick rollers.

   

6. Lightly dampen a cotton swab with water, and then squeeze it to remove any excess water.

7. Clean the rollers with the swab, rotating the rollers with your fingers to completely clean them.

8. Allow the rollers to dry for two minutes.

9. Set the printer upright.

10. Reconnect the power cord, and then turn on the printer.

You can refer this HP document for more assistance:- Click here

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

[Don1817]

I want the print on my printer to be a bit darker. I realize I can sometimes change the font, but not always.

Also I have one color (Pink, or maybe it's called majenta) that has slight white lines running through it when I am printing with a solid color area. The others are okay, but not the majenta.

[Riddle_Decipher]

@Don1817 Greetings from the HP Community!

Note: Please ensure the complete product name/number for a quicker response from the community, as we need to know what we are dealing with to provide an accurate solution: 

Click here for steps on finding the information we need!

Remember: Do not share any of your personal information such as serial, phone number, email ID, etc.

Meanwhile, did you go through the steps suggested by the last tech, if you've got the same printer as the OP: click here for steps to resolve the issue.

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!