-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Printers
- LaserJet Printing
- Re: Print margins are off on HP Color Laserjet Enterprise M5...
Create an account on the HP Community to personalize your profile and ask a question
02-18-2020 04:59 PM - edited 02-18-2020 05:13 PM
Print margins are off on HP Color Laserjet Enterprise M553. The top and bottom margins are fine but left margin smaller than right. How/where do I go to check/change margins?
I appreciate any help. Thanks!
Solved! Go to Solution.
Accepted Solutions
02-18-2020 08:10 PM
Using your printer's control panel, go into the Administration menu option,
Scroll to find and select General Settings
(For the M553x and M577 models, use the Save button to save a selected option.)
Scroll to find Print Quality and select
Scroll to find Image Registration
Print a test page and follow instructions to adjust as desired.
02-18-2020 07:55 PM
If the manual tray and the drawer produce different results then the first thing to check is your tray registration. If you print the menu map from the reports menu it will show you where that utility is located in the menus.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.
02-18-2020 08:10 PM
Using your printer's control panel, go into the Administration menu option,
Scroll to find and select General Settings
(For the M553x and M577 models, use the Save button to save a selected option.)
Scroll to find Print Quality and select
Scroll to find Image Registration
Print a test page and follow instructions to adjust as desired.
Didn't find what you were looking for? Ask the community