Printhead Replacement

[Epeterd]

I am getting an error message: "The printhead appears to be missing, not detected, or incorrectly installed."  I have replaced the printhead and the cartridges, yet still get this error message.  What should I do next?

[Raj1788]

@Epeterd

I suggest you do a Hard Reset on the printer

(1) Turn the printer on, if it is not already on.

(2) Wait until the printer is idle and silent before you continue.

(3) With the printer turned on, disconnect the power cord from the rear of the printer.

(4) Unplug the power cord from the wall outlet.

(5) Wait at least 60 seconds.

(6) Plug the power cord back into the wall outlet.

NOTE: HP recommends connecting the printer power cord directly to the wall outlet.

(7) Reconnect the power cord to the rear of the printer.

(8) Turn on the printer, if it does not automatically turn on.

The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

Then, click on this link: https://support.hp.com/in-en/product/hp-officejet-pro-8610-e-all-in-one-printer-series/5367603/docum... and follow the troubleshooting from step2 for Missing or Failed Printhead.

Refer to this document: https://support.hp.com/in-en/product/hp-officejet-pro-8610-e-all-in-one-printer-series/5367603/docum... for Resolving 'Ink System Failure', 'System Supply Problem' Errors.

Keep me posted, how it goes!

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Thank you for joining the HP Community.

Have a great day!

Cheers:)