Post new question
Posts: 1
Member Since: ‎03-19-2017
Message 1 of 2 (46 Views)

Re: HP LaserJet Pro MFP M125a unable to copy

Pls, I have the same problem as described above. my printer can't do photocopy. all the lights in the panel are showing and none of the button is working. please assist me. thanks
0 Kudos
HP Support Agent
Posts: 7,257
Member Since: ‎10-12-2016
Message 2 of 2 (30 Views)

Re: HP LaserJet Pro MFP M125a unable to copy

Greetings @Omuru


Welcome to HP Forums and Thanks for the post. 


I understand that you are unable to make a copy on your printer as none of the buttons are responding. 

Don't worry, I will be glad to assist you. 

Are you able to make a scan on the printer?

Are you able to print?


Recommend you to do a hard reset on the printer.

Disconnect the power cord of the printer.

Leave it idle for a minute.

If you are using a surge protector, disconnect it and connect the printer to the wall outlet directly. 

Turn the printer ON and check.

If the issue persists, connect the printer to your computer using a USB cable. 

Download the firmware update from and install it on the printer.


Let me know if this helped. 


If the information I've provided was helpful,

Please give us some reinforcement by clicking the "Accepted Solution" and "Kudos" buttons,

That’ll help us and others see that we’ve got the answers!

Good Luck.

I am an HP Employee

If you found this post helpful, you can let others know by clicking the Accept as Solution button. You can also show your appreciation, with a kudos, by clicking the Thumbs up" button!

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation