cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
1 0 0 0
Message 1 of 2
79
Flag Post
HP Recommended

Scanning problem

laser jet pro MFP M227 fdw
Microsoft Windows 10 (64-bit)

My printer is hooked up to our home net work with an ethernet cord.  I can print to it easily, but scanning requires running the HP print Doctor 5.0.6 nearly every time I want to scan.  I've re-installed the software yesterday and that didn't improve the scanning.  If I select the window Scan option it seems to work if I lay items on the flat bed of the scanner, which works only for a single page.  I'm trying to use the SP LaserJet MFP M227 HP Scan on my desktop to perform the scan when I encounter these problems.  

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
20,743 20,643 1,148 1,239
Message 2 of 2
33
Flag Post
HP Recommended

Scanning problem

@dguyaux

 

Welcome to HP support community.

 

Check Windows Image Acquisition settings

  • 1. In Windows, search for and open View local services .

  • 2. In the Services window, scroll down the list and find Windows Image Acquisition (WIA) .

  • 3. Look at the Status and Startup Type values.

    • If the status is Started or Running and the Startup Type is Automatic, WIA is running correctly. Skip to the next step.

      Making sure WIA Status is Running and Startup Type is Automatic

    • If the status is Disabled or no status displays, right-click Windows Image Acquisition (WIA), click Properties, click the General tab, select Automatic from the Startup type dropdown menu, and then click Start.

      If the Start button is grayed out, go back to the Services menu, make sure Remote Procedure Call, Shell Hardware Detection, RPC Endpoint Mapper, and DCOM Server Process Launcher are running and set as Automatic, and then start WIA.

You can refer this HP document for more assistance:- Click here

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

Reply
0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation