how to install in guest home router connection (i cant see it and cant use in guest but it work in m

[dipri]

how to install in guest home router connection (i cant see it and cant use in guest router connection but it work in main router connection)

It' s possible to see it and use it also in guest mode?

ty

[Riddle_Decipher · Accepted solution]

@dipri Here's all you need to know & do:

Step 1: Connect the printer to the Wi-Fi network

Before you can wirelessly print, connect the printer to the same local wireless network your computer or mobile device is on.

NOTE: 

Wireless printing does not work over limited guest networks in places such as college dorms and hotels. Use a USB cable or a Wi-Fi Direct connection instead.

1. Place the printer near the Wi-Fi router.

2. Turn on the printer and make sure ink cartridges are installed and paper is loaded.

3. Connect the printer to the local network.

   Printers with a touchscreen control panel:

   1. On the printer, select Restore Network Settings (or similar) from the Wireless , Settings , or Restore Settings menu.

   2. Get the network name (SSID) and password. Go to Finding Your Wireless Password for more information.

   3. Select Wireless Setup Wizard from the Wireless , Settings , or Network Setup menu, and then select your network name and enter the password.

      NOTE: 

      If the Wireless Setup Wizard is not listed, select Wi-Fi Protected Setup or WPS, select Push Button, and then follow the steps to connect to the network.

   Printers without a touchscreen control panel:

   1. Press and hold the Wireless button on the printer  for five seconds or until the light starts blinking. For Tango printers, press the Wireless button and the Power button on the rear of the printer until the blue bar flashes.

   2. Within two minutes, press and hold the WPS button on the router until the connection process begins.

      The light on the printer stops flashing when the connection completes.

   Routers without a WPS button:

   1. Download and install the HP Smart app from 123.hp.com (Android, iOS), or HP Smart (in English) from the Windows Store (Windows 10).

   2. Prepare the printer for a wireless network connection.

      NOTE: 

      You must complete the network setup within 2 hours.

      • For most HP printers: Press and hold the Wireless and Cancel buttons until the Wireless and Power lights blink.

      • For HP Laser printers: Press and hold the Wireless button until the Attention light blinks. The printer might restart.

      • For HP Tango printers: Press and hold the Wireless button on the back of the printer for 5 seconds until the Edge lighting flashes blue.

   3. Follow the guided steps in the HP Smart app to complete the setup for a wireless connection.

For more details: click here

P.S: Welcome to HP Community 😉

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!