cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
2 1 0 0
Message 1 of 4
227
Flag Post

hp laserjet p1102w not resetting network information

HP Recommended
hp laserjet p1102w
Microsoft Windows 8.1 (64-bit)

i have hp laserjet p1102w printer. it works well but i recently i tried to configure for  wireless network for that purpose i access the web services of my printer through ip address. 

 

Now the problem is here i set the wrong ip address (ipv4) in which at the end i write 255 yes.. and set ip configured by manual. and when i save changes the printer is now unavailable to access web services through this ip address as i set it to 255 at the end. i also attach the picture you can see the detail and network information.

I tried to reset my printer by doing power off the printer and holding down both wifi and X button for 15 sec after power on the printer but the it is not resetting even both the led blinks. the test page still not resetting the configuration and im unable to access the web services using this ip on a web browser, as i set it up invalid ip address. 

please help me how can i reset setting? what are the ways to do that other then buttons? hope you understand my problem looking forward for your response

IMG_20200813_001427_410~4.jpg

 

3 REPLIES 3
Highlighted
Level 16
Level 16
29,066 28,785 5,007 11,398
Message 2 of 4
Flag Post
HP Recommended

Hi,

Please make sure you perform the steps correctly as following:

  1. Turn the product off.
  2. Press and hold both the wireless and the cancel buttons, and then turn the product on.
  3. Keep holding the wireless and cancel buttons until all the lights blink in unison, only then release the buttons.

May you see any difference now?



Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution 🙂
Reply
0 Kudos
Highlighted
Author
New member
2 1 0 0
Message 3 of 4
Flag Post
HP Recommended

I exactly did it in the same manner. but it is not resetting. can you please tell me the other way to do that?

 

Reply
0 Kudos
Highlighted
New member
1 1 0 0
Message 4 of 4
Flag Post
HP Recommended

Which all lights blink in unison...Only Orange and Yellow blinking together.

Reply
0 Kudos
Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation